The Ensign Roll Film Reflex

 

Some 80 years after it's production, I purchased this Ensign Reflex on a fair in Houten Holland. At the first glance, it was worth the price I paid for it. But a closer look showed some major problems.
To achieve  my goal to take pictures with the oldie some day, first of all I'll have to try to solve the problems.

The Ensign Roll Film Reflex 1920's

Camera #E9680
In General
In the 1920's, the Houghton Butcher Ltd. produced the interesting designed, Ensign roll film reflex camera with focal plane shutter. The camera, if closed, without open viewing-hood, looks like a compact box camera. Even the lens is covered with a lens-hood. The camera, for it's time, was compact.  A closer look learns that we have to do with a professional press camera. The advantages of this particular camera for professional use in that time, where:

1) Reflex. What you see is what you get. Reverse left to right !
2) Focal plane shutter. Fast shutter-times up to 1/500 sec.
2) Quick film advancing. 6x9 cm on 120 Roll Film.
3) Security. No heavy breakable glass-plates.
4)  Extra Newton (sport) finder.
5)  Compact, solid, reliable housing.

The Outside.
The reflex works by a mirror looking through the Aldis-Butcher Anastigmat f 4,5, into the world outside and projects its image on the ground-glass on top of the camera. The viewing hood permits a good view at the ground glass, which can be  dark or light, depending on the diaphragm setting  from 4,5 to 32.
It must be said, that the position of the diaphragm setting on the lens is not very handy.

Because the film advancing handle is small sized and the position of the handle on the left side of the top of the box is not ideal for right handed photographers, it's a big advantage compared to the, in that period of time usual, heavy and breakable glass-plates. Glass-plates and sheet film holders handling is quite complicating and demands a lot of skill as one should not  forget to open  the dark-slide before exposing and to slide it back again after exposing. On the other hand, the roll-film was not generally used, as newspaper darkrooms prefered to develop each shot separately to give optimum quality negatives for half tone block making.
As advancing the film and cocking the shutter, are not synchronized, it's obvious that even this reflex roll-film camera is not a guarantee against blanks or double exposures.

On the right front-side of the camera a finder is located and on the opposite side, covered by a black metal box, an eye piece. It's called a Newton finder. Though it's not equipped with a coupled range finder, it permits the user rapid focusing during events in the streets and on the sporting grounds, where there is no time to use the viewing hood.

A look inside.
To open the camera, push the lock on the bottom of the camera. The hinged door opens and shows the inner side of the Ensign Reflex. The 6x9 cm roll film allowed the designer to make a compact housing, as the spools of the film find a place, left and right, next to the built-in lens, in front of the camera. In this front, a build-in mechanism, controlled by the knob on the left side of the camera, moves the lens, located in a lens-box,  to adjust the distance to the object. To prohibit light coming into the mirror house, the lens is placed in a kind of bellow. On the right side of the lens-box, the unexposed spool finds its place. The film runs around the mirror-box to the winding spool on the left side of the lens-box. On the back of the mirror-box, you can find the 6x9 cm focal plane shutter opening. The bottom of the mirror-case can easily be opened by sliding the bottom-plate off. It allows one to check the movements of the lower blinds or to check or adjust minor mirror problems. Until so far the legitimate access to the inner of the camera.

Discovery.
But there is more to discover and therefore we tackle the viewing-hood-case by unscrewing the 6 screws on top of it, but leave the two on the right and the two on the left from the hinged door untouched. The view-hood-case comes off easily and now it's obvious why we did not unscrew the four screws on top. The leather viewing hood is attached to the case and if it is not necessary to repair it, we leave it as it is. After removing the view-hood-case, we see the ground glass hold by two stripes of metal. Four more screws further and we're looking on, or maybe into the mirror. No need to say: "Do not touch the surface of the mirror", but if necessary, clean the dirty mirror, very careful,  with a soft paint brush. On the rear you can study the movements of the upper blind, by turning the shutter-cocking-knob. Don't unscrew the cocking-knob without making a mark of it's position. This is essential for the correct  shutter-time.

 

to be continued...


      Home  Jo Lommen Camera   Back to European cameras